Step 2. Install Throttle, Display, Light, e-Brake sensor and PAS
- You can choose to use the bike without the throttle (required in some EU countries), but if you wish to use the throttle please remove the grip from the handle and Install the throttle on the left or right side of the handlebar.
- Install the Display. Please note that the power button is located on the right side of the display.
Install the Headlight and Rear light.
Various fixing gear such as spacers, supports, nuts, and bolts are included in the kit.
- Install the Break sensor. Please check that the condition of the brake cable is in good condition and that the threads are straight. The sensor can be installed near the break or the handle. Please note that the sensor arrow needs to point in the direction where the handle is.
- Install PAS. Remove the left pedal crank with the tool included in the kit and add the PAS. Reinstall the crank.